ASME Y14.5M-1994 Dimensioning and Tolerancing
|
ID： |
139D33D09F5D41218185D7A2EA823506 |
|
文件大小(MB)： |
9.38 |
|
页数： |
239 |
|
文件格式： |
|
|
日期： |
2009-9-19 |
|
购买： |
文本摘录（文本识别可能有误，但文件阅览显示及打印正常，pdf文件可进行文字搜索定位）：
ASME Y14.5M,ADOPTION NOTICE,ASME Y14.5M, Dimensioning and Tolerancing, was adopted on 13 March 1994 for,use by the Department of Defense (DoD). Proposed changes by DoD activities must,be submitted to the DoD Adopting Activity: Commanding Officer, Naval Aviation Supply,Office, ATTN: Code 051 1.07, 700 Robbins Ave., Philadelphia, PA. 191 1 1 -5098. DoD,activities may obtain copieso f this standard from the Standardization DocumenOt rder,Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 191 11 -5094. The private,sector and other Government agencies may purchase copies from thAem erican,Society of Mechanical Engineers, 345 East 47th Street, New York, New York 1001 7.,Custodians:,Army - AR,Navy - SA,Air Force - 1 O,DLA - DH,Adopting Activity:,Navy - SA,Agent Activity:,Commander,Dahlgren Division,Naval Surface Warfare Center,ATTN: G52 (King),17320 Dahlgren Road,Dahlgren, VA 22448-51 O0,(Project DRPR-0297),Review activities:,Army - AT, AV, CE, CR, EA, ER, GL, ME, MI, SC, TE,Navy - AS, CH, EC, MC, OS, SH, TD, YD,Air Force - 11,13, 19, 68,70,71, 80, 84,90,99,DLA - CS, ES, GS, IS,NSA - NS,DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.,--``,,,,`,,`,`,`````,``````,,,,-`-`,,`,,`,`,,`---,A S I E YL4.5M 94 W 0759670 0549429 TB7 W,--``,,,,`,,`,`,`````,``````,,,,-`-`,,`,,`,`,,`---,ASME Y1 4.5M,ADOPTION NOTICE,ASME Y14.5M, Dimensioning and Tolerancing, was adopted on 13 March 1994 for use by the Department,of Defense (DoD). Proposed changes by DoD activities must be submitted to the DoD Adopting Activity:,Commanding Officer, Naval Aviation SupplyO ffice, AlTN.: Code 0511.07,700 Robbins AvenuPe,h iladelphia,PA 19111-5098. DoD activities may obtain copies of this standard from the Standardization Document Order,Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094. The private sector and other government,agencies may purchase copies from the American Society of Mechanical Engineers, 345 East 47th Street,New York, NY 10017.,Custodians:,Army - AR,Navy - SA,Air Force - 10,DLA - DH,Adopting Activity:,Navy - SA,Agent Activity:,Commander,Dahlgren Division,Naval Surface Warfare Center,ATTN: G52 (King),17320 Dahlgren Road,Dahlgren, VA 22448-5100,(Project DRPR-0297),Review activities:,Army - AT, AV, CE, CR, EA, ER, GL, ME, MI, SC, TE,Navy - AS, CH, EC, MC, OS, SH, TD, YD,Air Force - 11, 13, 19, 68, 70, 71, 80, 84, 90, 99,DLA - CS, ES, GS, IS,NSA - NS,AREA DRPR,DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.,--``,,,,`,,`,`,`````,``````,,,,-`-`,,`,,`,`,,`---,ASME Y14-5M 74 m 0757670 0547433 b37 m,AN ASME NATIONAL STANDARD,ENGINEERING DRAWING AND RELATED DOCUMENTATION PRACTICES,Dimensioning and,Tolerancing,ASME Yl4.5M-I994,[REVISION OF ANSI Y14.5M-1982 (R1988)I,The American Society of,Mechanical Engineers,345 East 47th Street, New York, N.Y. 1001 7,--``,,,,`,,`,`,`````,``````,,,,-`-`,,`,,`,`,,`---,ASME YL4=5M 94 m 0759670 0 5 4 9 4 3 2 5 7 3 m,Date of Issuance: January 23, 1995,This Standard will be revised when the Society approves the issuance of a,new edition. There will be no addenda or written interpretations of the requirements,of this Standard issued to this edition.,ASME is the registered trademark of The American Society of Mechanical Engineers.,This code or standard was developed under procedures accredited as meeting the criteria for,American National Standards. The ConsensusC ommittee that approved the code or standard was,balanced to assure that individuals from competent and concerned interests have had an opportunity,to participate. The proposed code or standard was made available for public review and,comment which provides an opportunity for additional public input from industry, academia,regulatory agencies, and the public-at-large.,ASME does not "approve," "rate," or "endorse" any item, construction, proprietary device, or,activity.,ASME does not take any position with respect to the validity of any patent rights asserted in,connection with any items mentioned in this document, and does not undertake to insure anyone,utilizing a standard against liability for infringement of any applicable Letters Patent, nor assume,any such liability. Users of a code or standard are expressly advised that determination of the,validity of any such patent rights, and the risk of infringement of such rights, is entirely their own,responsibility.,Participation by federal agency representative(s) or person(s) affiliated with industry is not to,be interpreted as government or industry endorsement of this code or standard,ASME accepts responsibility for only those interpretations issued in accordance with governing,ASME pr……
……